NEC Express5800/R110i-1 Maintenance Manual

Also see for EXP333: User guide

Contents

2. Server ConfigurationExpress5800/R110i-1, T110i-S, T110i Maintenance Guide 107Chapter 2 Useful Features(2/2)Item Description Default ValueIPv6 PropertyIPv6 Enable or disable IPv6. DisableAddress AssignmentModeSpecify the mode to assign IPv6 address (Static or Dynamic). *12 DynamicLink Local Address Display link local address. *12 –Global Address Display IPv6 address when Dynamic is specified for assignment mode. *12 *13 –Static Address Specify IPv6 address when Static is specified for assignment mode. *12 0::0Prefix Length Specify the prefix length when Static is specified for assignment mode. *12 64Gateway Address Specify the gateway address when Static is specified for assignment mode. *12 0::0Access LimitationLimitation Type Select the Access Limitation Type.Allow All: Access to BMC is not limited.Allow Address: Specify the IP Address that is allowed to access BMC.Deny Address: Specify the IP Address that deny to access BMC.Allow AllIP Address Specify the IP Address (IPv4) to allow or deny to access with BMC. *8 *9 BlankServiceHTTPS Enable or disable HTTPS service. *10 EnableHTTPS Port Number Specify the HTTPS port number.*11 443HTTP Enable or disable HTTP service. *10 EnableHTTP Port Number Specify the HTTP port number. *11 80SSH Enable or disable SSH service. EnableSSH Port Number Specify the SSH port number. *11 22*1: Can be specified if the server supports this feature.*2: When set to "Shared BMC LAN", the BMC LAN port is disabled. When set to "Shared BMC LAN", the system (OS) LAN portalso transmits or receives data. Thus, the network performance may be reduced due to load of system LAN (or BMC LAN).*3: If an illegal value is specified for subnet mask, an error message is displayed and setting is disabled.*4: Can be changed only when DHCP is set to "Disable".*5: Can be changed only when DHCP is set to "Enable".*6: Host Name should be within 63 characters.Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).*7: Host Name and Domain Name should be within total of 255 characters.Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).*8: The range of IP address to "Allow" or "Deny" access is delimited by ",(Comma)". With regard to the setting of “Deny” access,"*(Asterisk)" can be described as a wild-card. (ex: 192.168.1.*,192.168.2.1,192.168.2.254)*9: Can be specified when Access Limitation Type is "Allowed Address" or "Deny Address". The length must not exceed 255characters.*10: If HTTP is set to "Enable", HTTPS is changed to "Enable" automatically. You are not allowed to set "Enable" to HTTP only.*11: Port number can be specified only when the relevant port is set to "Enable". The port number must be unique.*12: Can be specified only when IPv6 is set to "Enable".*13: Displayed only when "Dynamic" is specified for Address Assignment Mode.