NEC Express5800/R110i-1 Maintenance Manual

Also see for EXP333: User guide

Contents

5. RAID System ConfigurationExpress5800/R110i-1, T110i-S, T110i Maintenance Guide 129Chapter 2 Useful Features5.3 Operating Procedures for Configuration Utility in the LegacyMode5.3.1 Create/Add Configuration1. Run LSI Software RAID Configuration Utility.2. From the TOP menu (Management Menu), select Configure, and then New Configuration.To add settings to an existing configuration, select View/add Configuration.Important Creating a configuration by using "New Configuration" clears the existingconfiguration. To add configuration to the existing configuration, select"View/add Configuration".Note  You cannot specify the Virtual Drive capacity on the Easy Configurationmenu. UseNew Configuration or View/Add Configuration instead. For RAID10, the Virtual Drive is configured with the maximum capacity. Youcannot specify the capacity. For RAID0, you can skip the step for checking the consistency.Run LSI Software RAID Configuration UtilityCreate configuration information(Virtual Drive settings)Check the Virtual Drive settingsInitialize Virtual DrivePerform Consistency CheckExit LSI Software RAID Configuration Utility