2 - 232.4.10 Default settings (With factory mode)(1) Set the default values as shown in the table (user mode) given in the OSD display (Referto 2.3.3.1 User mode).If the setting class is an item for each timing, carry out for each adjustment timing exceptthe item of default setting "CENTER".(2) Return to the user mode with the front panel.(3) Execute FACTORY RESET to confirm that each OSD setting is as shown in the table (usermode) given in the OSD display (Refer to 2.3.3.1 User mode).The default setting CENTER is the factory adjustment value called when RESET button ispressed and then PROCEED button is pressed in the normal mode.Only CONTRAST will be set to 100% when RESET button is pressed and then PROCEEDbutton is pressed in the normal mode.(4) After setting the default values, turn the power switch OFF.Adjustment itemDefault settingsAdjustment mode/setFactory modeImput signal/patternEach adjustment timingCrosshatchStatusindicator
