2 - 292.5.1.10 Adjustment value listThe horizontal width, vertical width and DBF-H amplitude must be within the following ranges.TimingNo.12345678910111213141516171819202122232425262728Adj. value396 }5396 }5396 }5396 }5371 }5371 }5396 }5396 }5396 }5396 }5Adj. value297 }4297 }4297 }4297 }4297 }4297 }4297 }4297 }4297 }4297 }4Standard Adj. value370 }10370 }10370 }10370 }10340 }10340 }10370 }10370 }10370 }10370 }10Max. Adj. value430430430430400400430430430430Standard Adj. value150 }5150 }5150 }5150 }5150 }5150 }5150 }5150 }5150 }5150 }5Max. Adj. value190190190190190190190190190190Horizontal width (mm) Vertical width (mm) DBF-H amplitude (H) DBF-V amplitude (V)Standard adjustment value: in case of determining DBF voltageMaximum adjustment value: the value impossible to set the maximum of DBF voltage2.5.1.11 Confirming EDGE LOCK, SYNC ON GREENWhen an optional timing is input, confirm that the screen should meet with the judgementcriteria below.Timing : Check 4 (35kHz / 66Hz), full white.Judgement criteria : Back raster color coodination should vary.2.5.1.12 Checking the functions during Composite Sync input[Composite Sync]Timing: Check 2 (35kHz/66Hz), full whiteIn the normal mode, input the above timing to confirm that the operation is normal.Adjustment itemChecking the functions during Sync.on Green and Composite Sync inputAdjustment mode/set Imput signal/patternCheck 2 : 35kHz / 66HzFull whiteStatusindicator
