English-7EnglishControlsOSM (On-Screen Manager) control buttons on the front of the monitorfunction as follows:To change DVI/D-SUB signal input, press the RESET button.NOTE: OSM must be closed in order to change DVI/D-SUB signalinput.NOTE: When RESET is pressed in the main and sub-menu, awarning window will appear allowing you to cancel the resetfunction.When OSM controls are activated, icons are displayed at the top of themenu. If an arrow () is displayed in a sub-menu, it indicates furtherchoices are available. To enter a sub-menu, press PROCEED.Brightness/Contrast ControlsBrightness: Adjusts the overall image and background screenbrightness.Contrast: Adjusts the image brightness in relation to the background.Sub-MenuExits to the OSM main menu.Moves the highlighted areaup/down to select one of thecontrols.Moves the bar in the - or +direction to decrease orincrease the adjustment.Only executes control orenters sub-menu.Resets the highlighted controlto the factory setting.EXITCONTROL /CONTROL -/+PROCEEDD-SUB/DVI-ARESETMain MenuExits the OSM menu.Moves the highlightedarea up/down to selectone of the controls.Moves highlighted arealeft/right to select one ofthe controls.Has no function.Without OSM menuscreen, push to select thesignal input connector,D-SUB or DVI-A.Resets all the controlswithin the highlightedmenu to the factorysetting.
