English-8Degauss: Eliminates the build-up of stray magnetic fields which alter thecorrect scan of the electron beams and affect the purity of the screencolours, focus, and convergence. When activated, your screen image willjump and waver a bit as the screen is demagnetised.Caution: Please allow a minimum of 20 minutes to elapse betweenuses of the Degauss function.Size and Position ControlsAutoAdjust: Automatically adjust the horizontal and vertical size andposition settings for applicable timings.Left/Right: Moves the image horizontally (left or right).Down/Up: Moves the image vertically (up or down).Narrow/Wide: Decreases or increases the horizontal size of the image.Short/Tall: Decreases or increases the vertical size of the image.Colour Control/Colour Control SystemColour presets 1 through 5 selects the desired colour setting. The bar isreplaced by the colour setting choice from 1 to 5. Each colour setting isadjusted at the factory to the stated Kelvin. If a setting is adjusted, thename of the setting will change from Kelvin to Custom.Red, Green, Blue: Colour Control System decreases or increases themonitor’s red, green or blue colour guns depending upon which isselected. The change in colour will appear on screen and the direction(decrease or increase) will be shown by the bars.sRGB Mode: sRGB mode provides the suitable colour managed pictureimage. You can not change Red, Green and Blue colours individually.NOTE: In this mode, Brightness and Contrast are not adjustable.Geometry ControlsGeometry Controls MenuThe Geometry controls allow you to adjust the curvature or angle of thesides of your display.Sides In/Out (pincushion): Decreases or increases the curvature of thesides either inward or outward.
