2 - 302.5.1.13 Confirming the full white luminanceCarry out the following confirmation in FACTORY mode (as the back raster luminance of Euro-pean model declines in NORMAL mode).Timing No. 12 (106.25kHz/85Hz, 1600 x 1200), input amplitude = 0.7Vp-pConfirm that the full white luminance is the following value.2.5.1.14 Confirming CONVERGENCE compensation functionConfirm that CONVERGENCE changes by varying HORIZONTAL and VERTICAL BASIC CON-VERGENCE.2.5.1.15 Confirming ROTATION compensation functionConfirm that the picture rorates by changing ROTATE.2.5.1.16 Luminance/color coordination uniformityThe luminance ratio between the center and periphery must be 80% or more with timing No. 12(106.25kHz/85Hz, 1600 x 1200) COLOR 1.The color coordination difference between the center and periphery must be ∆x, y < ±0.012 atCOLOR 1 / sRGB / 5.2.5.1.17 Confirming the full white color coordinationCarry out the following confirmation in FACTORY mode (as the back raster luminance of Euro-pean model declines in NORMAL mode).Confirm that the color coordination at the center of the full white is within the following range attiming No.12 (106.25kHz/85Hz, 1600 x 1200).* Confirmation of OSD coodinationX=0.283±0.04, Y=0.297±0.05 (Confirm at white colored area in OSD)Adjustment itemConfirming the full whiteluminanceAdjustment mode/set Imput signal/patternNo.12: 106.25kHz / 85Hz 1600x1200Full whiteStatusindicatorCondirmation itemColorcoordinationCOLOR 10.283 0.0070.297 0.007COLOR 20.313 0.0070.329 0.007COLOR 30.345 0.0070.359 0.007xyAdjustment itemLluminance/colorcoordination uniformityAdjustment mode/set Imput signal/patternNo.12: 106.25kHz / 85Hz 1600x1200StatusindicatorCOLOR 1 COLOR sRGB COLOR 5105 or more 92 or more 77or more