NEC LCD Monitor Manual 

Also see for LCD Monitor: Control guide

Contents

NEC LCD Monitor Manual  Manual pdf 60 page image

(60/137)10.2 Schedule WriteThis command is used in order to write the setting of the Schedule.1) The controller requests the monitor to write Schedule.Header Message Check code DelimiterSOH-'0'-Monitor ID-'0'-'A'-'2'-'6'STX-'C'-'2'-'2'-'2'-PG-ON HOUR-ON MIN-OFF HOUR-OFF MIN-INPUT-WD-FL-P MODE-EXT1-EXT2-EXT3-EXT4-EXT5-EXT6-EXT7-ETXBCC CRHeaderSOH (01h): Start of Header'0' (30h): ReservedMonitor ID: Specify the Monitor ID of which you want to change a setting.Ex.) If Monitor ID is '1', specify 'A'.'0' (30h): Message sender is the controller.'A' (41h): Message type is "Command".'2'-'6'(32h, 36h): Message length.MessageSTX (02h): Start of Message'C'-'2'-'2'-'2' (43h, 32h, 32h, 32h): Schedule writes commandPG-ON HOURS-ON MIN-OFF HOURS-OFF MIN-INPUT-WD-FL-P MODEEXT1-EXT2-EXT3-EXT4-EXT5-EXT6-EXT7: Schedule dataPG: Program No.'0'-'0'(30h, 30h): Program No.1|'0'-'6'(30h, 36h): Program No.7ON_HOUR: Turn on time (hour)'0'-'0'(30h, 30h): 00|'1'-'7'(31h, 37h): 23 (=17h)'1'-'8'(31h, 38h): ON timer isn't set.ON_MIN: Turn on time (minute)'0'-'0'(30h, 30h): 0|'3'-'B'(33h, 42h): 59'3'-'C'(33h, 43h): On timer isn’t set.OFF_HOUR: Turn off time (hour)'0'-'0'(30h, 30h): 00|'1'-'7'(31h, 37h): 23 (=17h)'1'-'8'(31h, 38h): Off timer isn't set.OFF_MIN: Turn off time (minute)'0'-'0'(30h, 30h): 0|'3'-'B'(33h, 42h): 59 (=3Bh)'3'-'C'(33h, 43h): Off timer isn’t set.Note:* The same time as ON time and OFF time cannot be set.* Set '1'-'8' to ON/OFF_HOUR and '3'-'C' to ON/OFF_MIN, when ON/OFF time is deleted.INPUT: Timer input'0'-'0'(30h,30h): No mean (works on last memory)'0'-'1'(30h,31h): VGA'0'-'2'(30h,32h): RGB/HV'0'-'3'(30h,33h): DVI'0'-'5'(30h,35h): VIDEO'0'-'7'(30h,37h): S-VIDEO'0'-'C'(30h,43h): Y/Pb/Pr'0'-'D'(30h,44h): OPTION