4-14 Configuring Your ServerPCI Configuration submenuWhen [PCI Configuration] is selected in the Advanced menu and then the Enter key is pressed, thescreen below is displayed.For details about the options, see the following table.Option Parameters DescriptionLAN Controller Disabled[Enabled]Specify whether to enable or disable the onboard LANController.LAN1 Option ROMScanDisabled[PXE Boot]iSCSI BootSpecify the boot method for LAN1, which is onboard.LAN2 Option ROMScanDisabled[PXE Boot]iSCSI BootSpecify the boot method for LAN2, which is onboard.PCI Slot 0A OptionROMDisabled[Enabled]Specify whether to enable or disable an option ROM fora RAID controller installed in a slot dedicated to RAIDcontrollers.PCI Slot 2B/3BOption ROMDisabled[Enabled]Specify whether to enable or disable an option ROM fora PCI card connected to the full-height riser card.PCI Slot 1C-3COption ROMDisabled[Enabled]Specify whether to enable or disable an option ROM fora PCI card connected to the low-profile riser card.[ ]: Factory-setIMPORTANT: For a RAID controller, LAN card (network boot), orFibre Channel controller, if no hard disk drive on which an OS isinstalled is connected, set the option ROM for that slot to [Disabled].
