Installing Windows Server 2008 R2 D-7Windows Server 2008 R2 Clean InstallationThis section explains how to perform a clean installation of Windows Server 2008 R2.Follow steps below appropriate to your environment.1. Turn on your system.IMPORTANT: To install Windows Server 2008 R2, you may need toupdate BIOS.To check if your system needs a BIOS update, go to:http://www.nec.com/express/2. Insert the Windows Server 2008 R2 DVD-ROM into your DVD-ROM drive.3. Restart the system.To restart the system, press Ctrl + Alt + Del or turn off the system once, and then turn iton again.IMPORTANT: When prompted to [press any key to boot from CD orDVD], press Enter while the message is displayed.If the Windows installation screen (shown in step 4) does not appear,turn off the system, and then turn it on again.The DVD-ROM starts. A message "Windows is loading files …" appears.
