4-22 Configuring Your ServerFor details about the options, see the following table.Security settings can be specified in the submenu that opens by selecting [Security Configuration]and pressing Enter.Option Parameter DescriptionPasswordConfiguration– –AdministratorPasswordUp to 20 alphanumericcharactersWhen the Enter key is pressed, theadministrator password entry screen isdisplayed. This password can be used toaccess all setup menus. This setting canonly be specified by logging in as anadministrator when starting up the setuputility.User Password Up to 20 alphanumericcharactersWhen the Enter key is pressed, the userpassword entry screen is displayed. Thispassword can only be used to accesscertain setup menus. This setting can onlybe specified by logging in as anadministrator when starting up the setuputility.SecurityConfiguration– –Password On Boot [Disabled]EnabledSpecify whether to enable or disablepassword entry on boot. An administratorpassword must be specified in advance. Ifan administrator password is specified andthis option is set to [Disabled], BIOS isjudged to have been started up by a normaluser.Disable USB Ports [Disabled]FrontRearInternalFront + RearFront + InternalRear + InternalFront + Rear + InternalSpecify whether to enable or disable theUSB ports.Trusted Computing[ ]: Factory-set
