Using This Guide ixUsing This GuideWelcome to the Server NEAX Express Service and Reference Guide. This service andreference guide contains all the information found in the System User’s Guide, includingdisassembly and reassembly instructions for all field replaceable units (FRUs). This serviceand reference guide also contains system connector locations, external device connector pininformation, and a complete parts list, including an exploded view of the system.If you have any comments regarding this service and reference guide or if you thinksomething needs to be changed, please contact us. Limit your comments to issuesconcerning the documentation only, and indicate which service and reference guide you arereferring to. For all other service related issues, use your normal feedback channels.This guide contains the following information: Chapter 1, “System Overview” provides an overview of your system and describes yoursystem’s major system components. See this chapter to familiarize yourself with yoursystem. Chapter 2, “Setting Up Your System” tells you how to select a site, unpack the system,make cable connections, and power on your system. Chapter 3, “Configuring Your System” tells you how to configure the system andprovides instructions for running the BIOS Setup Utility and the Adaptec ConfigurationUtility, which is used to configure SCSI devices in your system. This chapter alsoprovides information on system board jumper settings. Chapter 4, “Disassembly and Reassembly” describes how to take the system apartprovides you with instructions for upgrading your system with an additional processor,optional memory, options cards, and peripheral devices. Chapter 5, “Problem Solving” contains helpful information for solving problems thatmight occur with your system. Chapter 6, “Illustrated Parts Breakdown” contains the exploded view and parts lists forthe server's major assemblies. Part numbers are also provided for optional hardware. Appendix A, “System Cabling” includes cabling information for the two onboard SCSIcontrollers and the onboard IDE controllers. Appendix B, “System Setup Utility” provides information for configuring onboardresources and add-in boards. It also provides information on viewing the system eventlog. Appendix C, “Emergency Management Port” provides information on a feature thatprovides an interface to the Emergency Management Port (EMP) Console Manager.This interface allows remote server management via a modem or direct connection. Appendix D, "Platform Event Paging" provides information and operating instructionson a feature that allows your server to be configured to automatically dial up a pagingservice and page you when a server management related event occurs.