Configuring Your System 3-23Adaptec SCSI Utility Setup Configurations (Continued)OPTIONRECOMMENDED SETTINGOR DISPLAY ONLYYOURCONFIGURATIONDisplay Messages During BIOSInitializationEnabledExtended BIOS Translation for DOSDrives >1 GByteEnabledVerbose/Silent Mode VerboseHost Adapter BIOS (Configuration UtilityReserves BIOS Space)Enabled1Support Removable DisksUnder BIOS as Fixed Disks 1, 2 Boot Only1BIOS Support for Bootable CD-ROM Enabled1BIOS Support for Int13 Extensions Enabled 11 No effect if BIOS is disabled.2 Do not remove media from a removable media drive if it is under BIOS control.Exiting Adaptec SCSI UtilityTo exit the Adaptec SCSI Utility, press ESC until a message prompts you to exit(if you changed any settings, you are prompted to save the changes before youexit).Installing Video DriversAfter configuring the system, you need to install video drivers to take fulladvantage of the features of the onboard Cirrus Logic CL-GD5480 super VGAvideo controller. The CD shipped with your system includes video drivers for use withDOS and Windows NT. Check the README.TXT file on the CD forinformation on installing these drivers. For other operating systems, see your OS instructions for installingdevice drivers.
