C-10 Emergency Management Port! Serial Line - must be filled out when the line selection is set to Direct connect(Serial Line). Baud Rate - must be 19200 for EMP to connect properly. COM Port No. - set the COM Port number to which the null modem serialcable is connected.! Connect - initiates connection to the connected server. When this button is clicked,you are prompted for the EMP password.! Config - displays the Phonebook dialog.! Cancel - exits the Connect dialog without any action taken.! Help - displays dialog level help information.Power On/OffSelecting Power On/Off from the Action menu allows you to power the server on or off,with post-power-up options. It generates the Power on/off dialog.Power On/Off DialogOptions available in the dialog are:! Power ON - powers on the server.! Power OFF - powers off the server. This option is not allowed if the server isconfigured in RESTRICTED mode for EMP operations.! Post-power-up option - sets the mode selection of the server to EMP active orBIOS redirection. The setting is available after the next power-up. The defaultselection is EMP active.! Cancel - exits the dialog without any action taken.! Help - displays dialog level help information.
