System Setup Utility B-7Resource Configuration Add-in (RCA) WindowThe RCA provides three major functions:! Creates representations of devices that cannot be discovered by thesystem (ISA cards)! Modifies the contents of the system by adding and removing devices! Modifies the resources used by devices.You can use the RCA window to define an ISA card or add an ISA card byclicking on the appropriate button. Removing an ISA card requires that the cardbe highlighted in the Devices section of the screen before clicking on the button.1. From the SSU main window, launch the RCA by selecting the “Resources”task under the RCA heading in the task box. Click OK.2. When the RCA window appears, it displays messages similar to thefollowing:Baseboard: System BoardPCI Card: Bus 00 dev 00 -– Host Processor BridgePCI Card: Bus 00 dev 0D –- Multifunction ControllerPCI Card: Bus 00 dev 0F –- Ethernet ControllerPCI Card: Bus 00 dev 12 –- Multifunction ControllerPCI Card: Bus 00 dev 14 –- VGA Controller3. To configure a device, select its name in the Devices section of the RCAwindow, and press the spacebar, press ENTER, or double-click on its name.4. Make configuration changes and click on OK to return to the RCA window.Repeat Steps 3 and 4 to configure additional devices.5. Save all the changes made by clicking on the Save button. Saving writesyour current configuration to nonvolatile storage where it will be availableto the system after every reboot.6. Close the RCA window and return to the Main Menu by clicking on theClose button.
