5Battery Installation and ReplacementInsert the 2 “AAA” batteries, making sure to set them inwith the proper polarity.1.Press and open the cover.2.Align the batteries according to the (+) and (–) indicationinside the case.3.Replace the cover.!5 MULTINot functional for the models covered in this manual.!6 SELECTNot functional for the models covered in this manual.!7 AUTO ADJUSTPress this button to adjust Fine Picture, Picture ADJ,Position, and Contrast automatically, or to switch thescreen size to ZOOM mode automatically with thesuperimposed caption displayed fully only when thepicture contains dark areas above and below the picture.!8 ID SELECTSet the ID number in the remote control. The remotecontrol can then be used only for a display with thesame ID number. When several displays are usedtogether they can be controlled individually.!9 CLEARClears the number set by the ID SELECT button.@0 Remote control signal transmitterTransmits the remote control signals.@1 Remote JackInsert the plug of the remote cable (The 1/8 StereoMini cable) here when using the supplied remotecontrol in the wired condition.
