NEC PlasmaSync 42XM2 Operation Manual

Also see for PlasmaSync: Brochure & specs

Contents

NEC PlasmaSync 42XM2 Operation Manual Manual pdf 43 page image

36Video Wall settingUse this feature to configure a 2×2 or 3×3 video wall.Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.1. On the MAIN MENU, select “OPTION3”, then pressthe MENU/ENTER button.The “OPTION3” screen appears.2. Use the and buttons to select “VIDEO WALL”,then press the MENU/ENTER button.The “VIDEO WALL” screen appears.VIDEO WALLEXITDIVIDERPOSITIONDISP. MODEAUTO IDIMAGE ADJUSTP. ON DELAYPLE LINKREPEAT TIMER: 1: SPLIT: OFF: OFF: OFF: OFFSEL. RETURNADJ.3. Set the VIDEO WALL using and buttons.See page 36 to set DIVIDER.See page 36 to set POSITION.See page 37 to set DISP. MODE.See page 37 to set AUTO ID.See page 37 to set IMAGE ADJUST.See page 38 to set P. ON DELAY.See page 38 to set PLE LINK.See page 39 to set REPEAT TIMER.4. Once the setting is completed...Press the EXIT button to return to the OPTION3 menu.Note: A contingency method of shutting off the electricpower should be used in cases of emergency during videowall setup.Information Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.DIVIDERSet the 2×2 or 3×3 video wall.Example: Setting “4”Perform Steps 1-2 of VIDEO WALL, then...3. Use the and buttons to select “DIVIDER”.4. Use the and buttons to select “4”.The mode switches as follows each time the or button is pressed:→ OFF ↔ 1 ↔ 4 ↔ 9 ←VIDEO WALLEXITDIVIDERPOSITIONDISP. MODEAUTO IDIMAGE ADJUSTP. ON DELAYPLE LINKREPEAT TIMER: 4: SPLIT: OFF: OFF: OFF: OFFSEL. RETURNADJ.Information DIVIDER settingsOFF, 1 ....... 1 Screen (Matrix display function does notwork)4 ................ 4 Screens (2×2 video wall)9 ................ 9 Screens (3×3 video wall)* When you select “4” or “9”, set the VIDEO WALLPOSITION.VIDEO WALL POSITIONSet the position of each display.Example: Setting “4”Perform Steps 1-2 of VIDEO WALL, then...3. Use the and buttons to select “POSITION”, thenpress the MENU/ENTER button.The “VIDEO WALL POSITION” screen appears.4. Use the and buttons to select “NO. 4”.The mode switches as follows each time the or button is pressed:• 4 Screens→ NO. 1 ↔ NO. 2 ↔ NO. 3 ↔ NO. 4 ←• 9 Screens→ NO. 7 ↔ NO. 8 ↔ ....... ↔ NO. 14 ↔ NO. 15 ←VIDEO WALL POSITIONPOSITION NO. 4EXIT RETURNADJ.Information VIDEO WALL POSITION settings1 Screen ..... There is no need to set POSITION.4 Screens9 ScreensNO. 1 NO. 2NO. 4 NO. 3NO. 7 NO. 8 NO. 9NO. 10 NO. 11 NO. 12NO. 13 NO. 14 NO. 15