NEC PlasmaSync 42XM2 Operation Manual

Also see for PlasmaSync: Brochure & specs

Contents

NEC PlasmaSync 42XM2 Operation Manual Manual pdf 19 page image

12OFF TIMERTo set the off timer:The off timer can be set to turn the power off after 30, 60,90 or 120 minutes.1. Press the OFF TIMER button to start the timer at 30minutes.2. Press the OFF TIMER button to the desired time.3. The timer starts when the menu turns off.→ 30 → 60 → 90 → 120 → 0OFF TIMER 30To check the remaining time:1. Once the off timer has been set, press the OFF TIMERbutton once.2. The remaining time is displayed, then turns off after afew seconds.3. When five minutes remain the remaining time appearsuntil it reaches zero.OFF TIMER 28To cancel the off timer:1. Press the OFF TIMER button twice in a row.2. The off timer is canceled.OFF TIMER 0Note:After the power is turned off with the off timer ...A slight current is still supplied to the monitor. When youare leaving the room or do not plan to use the system for along period of time, turn off the power of the monitor.