NEC PlasmaSync 42XM2 Operation Manual

Also see for PlasmaSync: Brochure & specs

Contents

NEC PlasmaSync 42XM2 Operation Manual Manual pdf 33 page image

26Resetting to the default valuesUse these operations to restore all the settings (PICTURE,AUDIO, IMAGE ADJUST, OPTION1~3, etc) to thefactory default values.Refer to page 16 for items to be reset.1. On the MAIN MENU, select “OPTION1”, then pressthe MENU/ENTER button.The “OPTION1” screen appears.2. Use the and buttons to select “ALL RESET”.OPTION1 1 / 3EXITOSMBNC INPUTD-SUB INPUTRGB SELECTHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: AUTO: 1080B: OFF: OFFSEL. RETURNADJ.3. Use the and buttons to select “ON”, then press theMENU/ENTER button.OPTION1 1 / 3EXITOSMBNC INPUTD-SUB INPUTRGB SELECTHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: AUTO: 1080B: OFF: ONSEL. RETURNMENU/ENTER OKALL RESETSETTING NOWWhen the “SETTING NOW” screen disappears, thenall the settings are restored to the default values.Option2 Settings MenuSetting the power management for computerimagesThis energy-saving (power management) functionautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amount of time.Example: Turning the power management function onSet “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.1. On the MAIN MENU, select “OPTION2”, then pressthe MENU/ENTER button.The “OPTION2” screen appears.2. Use the and buttons to select “PWR. MGT.”.3. To turn the power management function on ...Use the and buttons to select “ON”.The mode switches as follows each time the or button is pressed:ON ↔ OFFOPTION2 2 / 3EXITPREVIOUS PAGEPOWER MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2NEXT PAGE: ON: ON: 3: OFFSEL. RETURNADJ.Information Power management function* The power management function automatically reducesthe monitor’s power consumption if the computer’skeyboard or mouse is not operated for a certain amountof time. This function can be used when using themonitor with a computer.* If the computer’s power is not turned on or if thecomputer and selector tuner are not properly connected,the system is set to the off state.* For instructions on using the computer’s powermanagement function, refer to the computer’s operatinginstructions. Power management settingsON ........ In this mode the power management functionis turned on.OFF ...... In this mode the power management functionis turned off. Power management function and POWER/STANDBY indicatorThe POWER/STANDBY indicator indicates the statusof the power management function. See page 27 forindicator status and description. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.