NEC PlasmaSync 42XM2 Operation Manual

Also see for PlasmaSync: Brochure & specs

Contents

NEC PlasmaSync 42XM2 Operation Manual Manual pdf 28 page image

21Adjusting the colorsUse this procedure to adjust hue and color density for red,green, blue, yellow, magenta and cyan.You can accentuate the green color of trees, the blue ofthe sky, etc.Example: Adjusting the color tune for blueSet “ADVANCED OSM” to “ON” in the MAIN MENU(1/2), then perform the following operations.1. On the MAIN MENU, select “PICTURE”, then pressthe MENU/ENTER button.The “PICTURE” screen appears.2. Use the and buttons to select “COLOR TUNE”,then press the MENU/ENTER button.The “COLOR TUNE” screen appears.3. Use the and buttons to select “BLUE”.4. Adjust using the and buttons.COLOR TUNEEXITREDGREENBLUEYELLOWMAGENTACYANRESET : OFFSEL. RETURNADJ.* If neither the or button is pressed within 5 seconds,the current selection is set and the previous screenreappears.To continue making other adjustments...Repeat from step 3.Information COLOR TUNE settingsRED ................ Makes red’s adjustmentGREEN ........... Makes green’s adjustmentBLUE ............... Makes blue’s adjustmentYELLOW ......... Makes yellow’s adjustmentMAGENTA ...... Makes magenta’s adjustmentCYAN .............. Makes cyan’s adjustmentRESET ............ Resets settings to the factory defaultvalue. Use and buttons to select“ON”, then press the MENU/ENTERbutton. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.Audio Settings MenuAdjusting the treble, bass and left/rightbalance and audio input selectThe treble, bass and left/right balance can be adjusted tosuit your tastes.Example: Adjusting the bass1. On the MAIN MENU, select “AUDIO”, then pressthe MENU/ENTER button.The “AUDIO” screen appears.2. To adjust the bass ...Use the and buttons to select “BASS”.3. Adjust the bass using the and buttons.AUDIOEXITBASSTREBLEBALANCEAUDIO INPUT1AUDIO INPUT2AUDIO INPUT3: VIDEO1: HD/DVD1: RGB1SEL. RETURNADJ.To continue adjusting the audio ...Repeat from step 2.Note : If “CAN NOT ADJUST” appears...Set “AUDIO INPUT” on the AUDIO menu correctly.Information Audio settings menuBASS .............. Controls the level of low frequencysound.TREBLE .......... Controls the level of high frequencysound.BALANCE ....... Controls the balance of the left andright channels. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.