NEC PlasmaSync 42XM2 Operation Manual

Also see for PlasmaSync: Brochure & specs

Contents

NEC PlasmaSync 42XM2 Operation Manual Manual pdf 34 page image

27PowermanagementmodeOnOffTurning the pictureback onPicture already on.Operate the keyboard ormouse. The picturereappears.POWER/STANDBYindicatorGreenRedPowermanagementoperating statusNot activated.Activated.DescriptionHorizontal and verticalsynchronizing signalsare present from thecomputer.Horizontal and/orvertical synchronizingsignals are not sentfrom the computer.Setting the picture to suit the movieThe film image is automatically discriminated andprojected in an image mode suited to the picture.[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]Example: Setting the “CINEMA MODE” to “OFF”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.1. On the MAIN MENU, select “OPTION2”, then pressthe MENU/ENTER button.The “OPTION2” screen appears.2. Use the and buttons to select “CINEMA MODE”.3. To set the CINEMA MODE to “OFF” ...Use the and buttons to select “OFF”.The mode switches as follows each time the or button is pressed:ON ↔ OFFOPTION2 2 / 3EXITPREVIOUS PAGEPOWER MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2NEXT PAGE: OFF: OFF: 3: OFFSEL. RETURNADJ.Information CINEMA MODEON ................... Automatic discrimination of theimage and projection in cinema mode.OFF ................... Cinema mode does not function. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.Reducing burn-in of the screenThe brightness of the screen, the position of the picture,positive/negative mode and screen wiper are adjusted toreduce burn-in of the screen.Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.1. On the MAIN MENU, select “OPTION2”, then pressthe MENU/ENTER button.The “OPTION2” screen appears.2. Use the and buttons to select “LONG LIFE”, thenpress the MENU/ENTER button.The “LONG LIFE” screen appears.LONG LIFEEXITPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: AUTO: OFF: OFF: OFF: OFFSEL. RETURNADJ.3. Set the LONG LIFE mode using and buttons.See page 27 to set PLE.See page 28 to set ORBITER.See page 28 to set INVERSE.See page 29 to set SCREEN WIPER.See page 30 to set SOFT FOCUS.Information Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.PLE (Peak Luminance Enhancement)Use this to activate the brightness limiter.Example: Setting “PLE” to “LOCK1”Perform Steps 1-2 of LONG LIFE, then...3. Use the and buttons to select “PLE”.4. Use the and buttons to select “LOCK1”.The mode switches as follows each time the or button is pressed:→AUTO ↔ LOCK1 ↔ LOCK2 ↔ LOCK3←LONG LIFEEXITPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: LOCK1: OFF: OFF: OFF: OFFSEL. RETURNADJ.Information PLE settingsAUTO .............. The brightness of the screen isadjusted automatically to suit thepicture quality.POWER/STANDBY indicator