Program 14 : Trunk, Basic Setup14-07 : Trunk Access Map SetupLevelINDescriptionUse Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an exten-sion access options for trunks. For example, an extension can place only outgoing calls on trunks towhich it has outgoing access. There are 126 (SL1000) 096 (SL1100) Access Maps with all 126(SL1000) 096 (SL1100) trunk ports programmed in Map 1 with full access.An extension can use one of the maps you set up in this program. Use Program 15-06 to assign TrunkAccess Maps to extensions. Each trunk can have one of eight access options for each Access Map.Emergency calls will override Program 14-07 settings.Input DataAccess Map Number 001 ~ 126 (SL1000)001 ~ 096 (SL1100)Item No. Trunk PortNumber Input Data01 001 ~ 126(SL1000)001 ~ 096(SL1100)0 = No access1 = Outgoing access only2 = Incoming access only3 = Access only when trunk on Hold4 = Outgoing access and access when trunk on Hold5 = Incoming access and access when trunk on Hold6 = Incoming and Outgoing access7 = Incoming access, outgoing access and access when trunk on HoldDefaultAccess map No. Trunk Port No. Default11 7 (T, R, H)2 7 (T, R, H): :126 (SL1000)096 (SL1100) 7 (T, R, H)21 0 (No access)2 0 (No access): :126 (SL1000)096 (SL1100) 0 (No access):1 0 (No access)2 0 (No access): :126 (SL1000)096 (SL1100) 0 (No access)ISSUE 1.0SL1000/SL1100Program14Program 14 : Trunk, Basic Setup2-108Downloaded from www.Manualslib.com manuals search engine
