Program 34 : Tie Line Setup34-09 : ANI/DNIS Service OptionsLevelINDescriptionUse Program 34-09 : ANI/DNIS Service Options to define the ANI/DNIS service option setup forE&M Class of Service.Input DataClass of Service 01 ~ 15ItemNo. Item Input Data Default Default RelatedProgramCOS 01 COS 02 ~ 1501 Receive FormatUse this option to specify theformat of the ANI/DNIS datareceived from the Telco. Makesure your entry is compatiblewith the service the Telco pro-vides. The character * indi-cates a delimiter.If Program 34-01-02 isselected to 2 (MF), thisProgram works only as4 =* ANI* DNIS* .0 = Address1 = * ANI *2 = * DNIS *3 = * ANI * Address *4 = * ANI * DNIS *5 = * DNIS * ANI *(* = Delimiter Code)0 0 34-01-0234-09-0202 Delimiter Dial CodeThis option defines the charac-ter Telco uses as a delimiter(see entries 1 ~ 5 in Item 1above). Valid entries are 0 ~ 9,#, and * .1 ~ 9, 0, #,* * * 34-09-0103 Route Setup of Receive DialThis option specifies the sourceof the data the system uses toroute incoming ANI/DNIS calls.If option 2 is selected, refer toProgram 34-09-04.0 = Fixed Route (Item 08)(No Routing)1 = Routes on ReceivedDNIS or Address Data2 = Routes on ReceivedANI Data0 0 22-09-0122-11-0134-09-0434-09-08ISSUE 1.0 SL1000/SL1100Program34Programming Manual 2-339Downloaded from www.Manualslib.com manuals search engine
