Program 22 : Incoming Call Setup22-14 : VRS Delayed Message for IRGLevelINDescriptionUse Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to define for each in-coming ring group the timers, VRS message number and type of tone for VRS Waiting Message.Input DataIncoming Ring Group Number 1 ~ 25Item No. Item Input Data Default01 1st Delayed Message Start TimeTime before the VRS Delay Message isplayed for IRG.0 ~ 64800 seconds 002 1st Delayed Message NumberVRS message that is used for the 1st De-layed Message.0 ~ 1010 = No Message101 = Fixed Message003 1st Delayed Message Sending CountThis is the number of times the 1st DelayMessage is played. If set to 0, the 1stDelay Message is not played.0 ~ 255 (time) 004 2nd Delayed Message NumberVRS message that is used for the 2nd De-layed Message.0 ~ 1010 = No Message101 = Fixed Message005 2nd Delayed Message Sending CountThis is the number of times the 2nd DelayMessage is played. If set to 0, the 2ndDelay Message is not played.0 ~ 255 (time) 006 Tone Kind at Message IntervalWhat is heard between the Delay Mes-sage.0 = Ring Back Tone1 = MOH Tone2 = BGM Source007 Disconnect Time After the End of VRSDelayed MessageTime, after all 2nd Delay Messages areplayed, before the caller is disconnected.0 ~ 64800 seconds0 = No Disconnect60ConditionsNoneFeature Cross ReferenceNoneISSUE 1.0SL1000/SL1100Program22Program 22 : Incoming Call Setup2-260Downloaded from www.Manualslib.com manuals search engine
