Program 26 : ARS Service & Least CostRouting26-02 : Dial Analysis Table for ARS/LCRLevelINDescriptionUse Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selectingAutomatic Route Selection (ARS/F-Route).• Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.Input DataDial Analysis Table Number 1 ~ 400ItemNo. Item Input Data Default Related Pro-gram01 Dial Dial Digits (maximum 16 digits)0 ~ 9, * , #, or for wild character (Press line key 1)No setting02 ARS Service Type 0 = No Service (None)1 = Route to Trunk Group2 = Select F-Route Access003 Additional Data/Service NumberIf Service Type 1 (in 26-02) : Select Trunk Group Num-ber0 ~ 25 (Trunk Group Number 0 = No Route)If Service Type 2 (in 26-02) :F-Route Time Schedule Not Used = 0 ~ 100(F-Route Table Number).Refer to Program 44-05 : ARS/F-Route Table on page2-368.F-Route Time Schedule Used = 0 ~ 100(F-Route Selection Number).Refer to Program 44-04 : ARS/F-Route Selection forTime Schedule on page 2-367.0 44-0444-0504 ARS Class of Service 0 ~ 16 005 Dial Treatment forARS0 ~ 15 006 LCR Carrier Table 0 ~ 25 007 Network SpecifiedParameter Table0 ~ 16 0 26-12ConditionsNoneFeature Cross Reference• Automatic Route Selection (ARS/F-Route)ISSUE 1.0SL1000/SL1100Program26Program 26 : ARS Service & Least Cost Routing2-294Downloaded from www.Manualslib.com manuals search engine
