Program 20 : System Option Setup20-25 : ISDN OptionsLevelINDescriptionUse Program 20-25 : ISDN Options to define the ISDN system options.Input DataItem No. Item Input Data Default01 Send the Release Message After Sub-scriber Hangs Up0 = Service Off1 = Service On102 Progress Indicate Information Element De-tect0 = Service Off1 = Service On103 Bearer Capability Select from SLTOutgoing0 = 3.1 KHz Audio1 = Speech004 Send DT until user dials first digit (LocalDial Tone)With Overlap Sending Mode, if the networkside stops dial tone when CLI is included inthe SETUP message, the system sends dialtone until the user dials the first digit insteadof the network.0 = Service Off1 = Service On005 T305 Timer Start After Sending DisconnectMessage0 = Service Off1 = Service On106 Call Proceeding Send Mode 0 = Service Off1 = Service On107 Local Busy Tone Mode Set When Discon-nect Message Received0 = Local Busy Tone Off1 = Busy Tone from NT (net-work side)008 Use of Lower Layer Compatibility (LLC)This Program must be set to (0 = Disable) forInternational Dialing when using Calling Num-ber Presentation (CPN) from station.0 = Disable (Off)1 = Enable (On)109 High Layer Compatibility (HLC) Sending 0 = Disable (Off)1 = Enable (On)110 S-Point Terminal Seizes Analog Trunk 0 = Disable (Off)1 = Enable (On)011 Automatic Changing System Clock WhenDate/Time Information Element Received0 = Disable (Off)1 = Enable (On)112 Call Forward Options (Auto Connect Send)Incoming Calls Forwarded Out AutomaticallyReturn Connect Message When OutgoingCall Receives Alerting Message.0 = Normal - No Message(Off)1 = Normal - No Message(On)013 Local Busy Tone (Release)Busy tone sends when T-point receiving aRELEASE message from Network.0 = Off1 = On014 No Response Release SendOperation mode setting for when secondT303 timer expires.0 = Off1 = On015 Call Reference selection for PRI 2B-ChTransfer0 = Off1 = On0ConditionsNoneISSUE 1.0SL1000/SL1100Program20Program 20 : System Option Setup2-192Downloaded from www.Manualslib.com manuals search engine
