Program 21 : Outgoing Call Setup21-05 : Toll Restriction ClassLevelINDescriptionUse Program 21-05 : Toll Restriction Class to set the system Toll Restriction classes (1 ~ 15).Input DataToll Restriction Class Number 1 ~ 15ItemNo. Item Input Data Default RelatedProgram Note01 International Call Restriction TableThis option assigns/unassigns theInternational Call Restrict Table forthe Toll Restriction Class you are pro-gramming. Enter International CallRestrict Table data in Program 21-06-01.0 = Unassigned (No)1 = Assigned (Yes)0 21-06-0102 International Call Permit CodeTableThis option assigns/unassigns theInternational Call Permit Table for theToll Restriction Class you are pro-gramming. Enter International CallPermit Table data in Program 21-06-02.0 = Unassigned (No)1 = Assigne02 d(Yes)0 21-06-0204 Maximum Number of Digits TableAssignmentSelect the table (defined in 21-06-03)to be used to determine the maxi-mum number of digits allowed foroutgoing calls.1 ~ 4 = Table0 = Disable (None)0 21-06-0305 Common Permit Code TableIt chooses whether the table set upby 21-06-04 is referred to, or not re-ferred to.0 = Unassigned (No)1 = Assigned (Yes)0 21-06-0406 Common Restriction TableIt chooses whether the table set upby 21-06-05 is referred to, or not re-ferred to.0 = Unassigned (No)1 = Assigned (Yes)0 21-06-0507 Permit Code TableSet the tables 1 ~ 4 when referring tothe table set up by 21-06-06.1 ~ 4 = Table0 = Disable (None)0 21-06-0608 Restriction TableSet the tables 1 ~ 4 when referring tothe table set up by 21-06-07.1 ~ 4 = Table0 = Disable (None)0 21-06-0709 Restriction for Common SpeedDialsUse this option to enable/disable TollRestriction for Common Speed Dial-ing numbers. If enabled, SystemSpeed Dialing numbers have thesame restrictions as manually dialednumbers.0 = Does Not Restrict1 = Following Re-striction Check010 Restriction for Group Speed DialsUse this option to enable/disable TollRestriction for Group Speed Dialingnumbers. If enabled, Group SpeedDialing numbers have the same re-strictions as manually dialed num-bers.0 = Does Not Restrict1 = Following Re-striction Check0ISSUE 1.0 SL1000/SL1100Program21Programming Manual 2-223Downloaded from www.Manualslib.com manuals search engine
