Printing on Transparencies 43USING PRINT MEDIAP RINTING ON T RANSPARENCIESKeep the following considerations in mind before you printon transparencies:• Create the information you need printed on thetransparencies within your application. Try printing on aplain sheet of paper first for proper placement.• You can only print transparencies from the Tray 1 or Tray2. Use no more than xx transparencies in Tray 2.• Load up to xx transparencies in the Multipurpose Tray(Paper Tray 1).note: Place transparencies on a flat surface afterremoving them from the Main Output Tray.• Use transparencies in letter or A4 size only.• Transparencies must be able to withstand temperaturesof 392°F (200°C) for at least 0.1 second.• Keep the paper path clean. Transparencies are especiallysensitive to dirt. If shadows appear on the sheets, cleanthe inside of the printer, refer to Chapter x, “MaintainingYour Printer.”1. Open and extend Tray 1 (A).2. Load transparencies (B). Properly adjust the WidthGuide.3. Configure the paper source, type, and size within yoursoftware application (C).4. Print to the Main Output Tray (D).NECSuperScript PrintersDo not fan transparencies!Print to Main Output TrayCBAD
