Manual Duplexing 51PRINTER TASKSM ANUAL D UPLEXINGYou can print on both sides of the paper from theMultipurpose Tray (Tray 1). The paper must go through theprinter twice.You can either print to the Main Output Tray orthe Face-up Output Tray (for heavier stock).Follow these steps to set up manual duplexing:1. From the Properties window choose the Paper tab andset up your basic print parameters, see page xx. ChooseTray 1 for your source.2. Then choose the Job Finishing tab (A).3. In the Manual Duplex Printing area select Long or Shortedge. Choose Flip on Long Edge if you want the bindingorientation along the left edge of the paper as in amagazine (B). Choose Flip on Short Edge if you want thebinding orientation along the top edge of the paper as ina calendar (C).4. Select the Print Instruction Sheet box.5. Click on the OK button6. Start printing. The printer automatically prints only theodd numbered pages.note: Once you get used to using manual duplexingyou probably will not need to print out the PrintInstruction Sheet.Instructions continued on next page.2note: Manual duplexing can cause the printerto get dirty more quickly and reduce print quality.See Chapter xx for internal cleaning instructions.A BCShort Edge in Portrait OrientationLong Edge inPortrait OrientationLong Edge in Landscape OrientationShort Edge inLandscape OrientationJob finishing tab here!
