– 121 –CHAPTER 2 Operations of SV8500 Server(6) Service Peg CountThe following shows Service Peg Count Listup Report and description of symbols in the report.• Tandem : The number of incoming calls that directly provide tandem connection(not via the Attendant Console)• Others : The number obtained by subtracting “Attendant”, “Station” and “Tan-dem” from “Incoming”. These calls include the following scenarios:-Incoming calls terminated but released before the line is connected.-Calls to unused numbers• VT(E-CCIS) Establish-ment [OUT]: The number of call originations through Virtual Tie Line (E-CCIS).• VT(E-CCIS) Establish-ment [IN]: The number of call terminations through Virtual Tie Line (E-CCIS).• Call Hold : The number of times that the line is on hold with dialing access codefor CALL HOLD [C-6].• Call Back : The number of times that CALL BACK [C-1] is set to the station withdialing the access code for CALL BACK.Note: The traffic data on the above report is an example.1 13 9 1 3 6 0 6 0 1 5 0Start Time: 10/27 16:21End Time: 10/2716:2510, 27, 2005[LOCALHOST::DTFA]* Display of Service Peg Count Data (DTF201) *Call HoldTenant 1Call Back Call Back Erow Call Waiting2 3 2 12 0 0 15CFA Cancel1 1 0 2 1Cancel OriginateCall WaitingTerminate Call Pick Up Direct CallPick UpCFA EntryCFB Entry CFB Cancel CFDA Entry CFDACancelSystemSpeed CallAccessIndividualSpeed CallAccessIndividualSpeed CallEntryTAS Answer12 1 0 0Off Hook On Hook On HookOG Queuing QueuingEntry QueuingCancelAdd OnConferenceConsult Hold Call Transfer0 0 0 0 0 82 5TRAFFIC MEASUREMENTPage (UP) Page (Down) Save Text File
