– 45 –CHAPTER 2 Operations of SV8500 Server2.3 Alarm IndicationsThe system has alarm lamps on EMA card as shown below. The table below lists the meaning of each lamp.Alarm Indications on EMA cardNAME COLOR DESCRIPTION REMARKSSYS ALM lamp RedFlashes in 1-second cycle. MN (minor) alarm: One of the system coolingfans is faulty, etc.Lights. MJ (major) alarm: Two or more system coolingfans are faulty, etc.OFF No failure is detected.ALM lampSYS0 RedLights when failure occurs on software operation in CPU #0(software operation failure during the system is operating).Flashes when failure occurs on software operation in CPU #0(software operation failure on starting up the system).OFF No failure is detected.SYS1 RedLights when failure occurs on software operation in CPU #1(software operation failure during the system is operating).Flashes when failure occurs on software operation in CPU #1(software operation failure on starting up the system).OFF No alarm is detected.PWRSYSALM SYS 1MB(SUB) SYSLOCK SYSSELPFTLINK OPE ALMINITPBI No.SYS 0 1 2 1 2SWO0 SWO1LINE SPEEDLINE SPEED34LINE SPEEDLINE SPEED12LINE SPEEDLINE SPEED34LINE SPEEDLINE SPEED12ONLINELOADPWRONLINELOADPWRPWR SYSALM SYS 1MB(SUB) SYSLOCK SYSSEL 10PFTLINK ACT ALMINIT PBI No.SYS 0 1 2 1 2SW00 SW01ONSYS ALM lamp ALM lamp (SYS1: used for CPU #1)ALM lamp (SYS0: used for CPU #0)EMA Card
