– 906 –CHAPTER 7Maintenance CommandsSINZ:System Initialize1.Functional OutlineThis command is used to initialize the system from PCPro.WARNING:Do not use this command when the system is in normal operation since this command ex-ecutes the system initialization.Note:When the system is initialized, PCPro is disconnected. After initialization is complete, log back intoPCPro.2.ParametersSystem InitializeThe system initialize is executed for ACT side with the current office data of MEM without loadingfrom the CF card.Office Data Load & System InitializeThe system initialize is executed for ACT side by loading the office data from the CF card to MEM.Program & Office Data Load & System InitializeThe system initialize is executed for ACT side by loading the program and the office data from the CFcard to MEM.Calling keep restoreThe system initialize is executed for ACT side while maintaining a call in progress.RestartThe system initialize is executed for ACT side by restarting the system.ShutdownThe system initialize is executed for ACT side by shutting the system down. System InitializeNote 1The system initialize is executed for STBY side with the current office data of MEM without loadingfrom the CF card. Office Data Load & System InitializeNote 1The system initialize is executed for STBY side by loading the office data from the CF card to MEM. Program & Office Data Load & System InitializeNote 1
