NTI SPLITMUX Series SPLITMUX-HD-4RT Installation And Operation Manual
Also see for SPLITMUX Series SPLITMUX-HD-4RT: Installation and operation manual
                                                                           | |
Contents
| 
SPLITMUX Quad Screen Video Splitter13DEVICE DISCOVERY TOOLIn order to easily locate NTI Devices on a network, the NTI Device Discovery Tool may be used. A link to the Discovery Tool isprovided on the web page that appears when you insert the instruction manual CD provided into your CD ROM drive. Either clickon the link or browse the CD to locate the NTIDiscover.jar file. The Discover Tool can be run from the CD or it can be savedto a location on your PC. Either way, to open it just double-click on the file NTIDiscover.jar . This will open the NTI DeviceDiscovery Tool.Note: The Device Discovery Tool requires the Java Runtime Environment (version 6 or later) to operate. A copy of Javaversion 6 is provided on the CD and a link to the web page from which it can be downloaded and installed is also on theCD.Note: The computer using the Device Discovery Tool and the NTI Device must be connected to the same subnet in orderfor the Device Discovery Tool to work. If no devices are found, the message “No Devices Found” will be displayed.Tip: If your Windows program asks which program to open the NTIDiscover.jar file with, select the Java program.Figure 13- Device Discovery ToolClick on the “Detect NTI Devices” button to start the discovery process. After a short time, the tool will display all NTI devices onyour network, along with their network settings.How to Use the Device Discovery ToolTo Change a Device’s Settings, within the row of the device whose settings you wish to change, type in a new setting and clickon the Enter key, or the Submit button on that row. If the tool discovers more than one device, the settings for all devices can bechanged and you can click on the Submit All button to submit all changes at once.To Refresh the list of devices, click on the Refresh button.To Blink the LEDs of the unit, click on the Blink LED button (This feature is not supported on all products.) The Blink LEDbutton will change to a “Blinking….” button. The LEDs of the unit will blink until the Blinking… button is clicked on, or the NTIDevice Discovery Application is closed. The LEDs will automatically cease blinking after 2 hours.To Stop the LEDs of the unit from blinking, click on the Blinking… button. The Blinking…. button will change to a Blink LEDbutton. |
Related manuals for NTI SPLITMUX Series SPLITMUX-HD-4RT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine