SPLITMUX Quad Screen Video Splitter64INFRARED REMOTE CONTROLThe IRT-UNV Infrared Remote Control allows the user to remotely control up to 15 NTI SPLITMUX-HD-4RT switches, providingthe ability to control connections.MaterialsMaterials supplied with the IRT-UNV:• NTI IRT-UNV Infrared Remote Control• 2- AAA Batteries (installed)ButtonsThe IRT-UNV Infrared Remote Control user interface consists of a keypad with29 buttons. The buttons used for the SPLITMUX have the following functions:• Numerical Values (1-4) Selects port numbers (for IN) Select mode to switch to• IN Pressed to indicate an input port selection• OUT Pressed to initiate change of mode• SYS Pressed to select the desired SPLITMUX to be controlled Only used when controlling multiple systems Must be followed by a system number: 1-15• SAVE Pressed to save a configuration of channels as viewed on the display• RECALL Pressed to recall and restore a configuration of channels previouslyviewed on the displayOperationOperation of the IRT-UNV is intuitive. The number of button presses requiredto complete any operation is kept to a minimum. This is accomplished usingintelligent software within the NTI SPLITMUX.Changing PortsTo change the Active port (FULL screen mode),press , then the port number (1-4).To change modes,For Full Screen Mode press , then <1>For Quad Screen Mode press , then <2>For PIP Screen Mode press , then <3>For Custom Screen Mode press , then <4>
