SPLITMUX Quad Screen Video Splitter58Output ConfigurationThe Output Configuration determines how the inputs will be viewed on the display. From this menu you can also select the AudioOutput Configuration which will provide settings for how the audio from the inputs is managed.Figure 66- OSD Output SettingsVideo Output SettingsOutput Port Name Enter a port name to associate with the display (optional)Output resolution Select the output resolution to send to the display (options shown on next page) or select Autoto have it choose from the EDID table.HDCP Mode Choose between:Force HDCP- Video is encrypted whether the source is encrypted or notAuto HDCP- Video to all ports is encrypted as long as at least one source is encrypted,otherwise, none are encrypted.Disable HDCP- Encrypted video from a source is not passed through at all, only non-encrypted video is allowed to pass throughAudio Output SettingsInput 1 Audio Mode Select the audio mode for the Input- between enabled/disabled/automaticInput 2 Audio Mode Select the audio mode for the Input- between enabled/disabled/automaticInput 3 Audio Mode Select the audio mode for the Input- between enabled/disabled/automaticInput 4 Audio Mode Select the audio mode for the Input- between enabled/disabled/automaticWhen Audio Mode is enabled, the audio will come through any time the input signal is present (whether the video is enabled ornot)When Audio Mode is disabled, no audio will be heard from that input.
