SPLITMUX Quad Screen Video Splitter1INTRODUCTIONThe SPLITMUX® HD Quad Screen Multiviewer allows you to simultaneously display video from four different computers or videosources on a single monitor providing resolutions up to 1920 x 1200.Features:• Quad, Picture in Picture, Full Screen, and Custom display modes.• Independent video in to video out resolution.• Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.• Connect digital sources to the splitter and display images on a digital monitor.• HDMI features supported:o Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.o Outputs: 24- and 30-bit sRGB.o Four-channel non-mixing or one-channel mixing stereo with 16-, 20-, or 24-bit uncompressed PCM audio.o Bandwidth up to 165 MHz (2.0625 Gbps).• Any DVI source or display can be connected by using the DVI-HD-xx-MM cable (not included).o Use DVIA-HD-CNVTR-LC or DVI-HD-CNVTR DVI + Audio to HDMI Converters to pass and independentlyswitch audio signals to the multiviewer.• Supports digital DVI (with DVI-HD-xx-MM cables, not included) and HDMI.• HDCP compliant• On-screen display• Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants• Switch audio independently of video from HDMI sources• Control the multiviewer through the front panel buttons, on screen display (OSD), RS232 serial port, infrared remotecontrol or Ethernet.• HDMI-embedded audio switching (four-channel stereo, non-mixing or one-channel stereo, mixing).• Backup and restore multiviewer configuration.• Select default EDID or copy EDID from output monitor.o Supported output resolutions can be selected or set to auto detect.• Available options: desktop unit, 1RU rackmount unit, dual side-by-side rackmount units in 1RU.o Rackmount units can be mounted so that the front panel buttons are facing the front or back of the rack.o Rackmount units include cable management shelf.