SPLITMUX Quad Screen Video Splitter50Figure 54- Text Menu- PIP Mode SettingsPip Screen Mode SettingsActive Channel Select which active channel is in full screen modeEnable full screen Enable active input in full screen mode with overlayEnable aspect ratio enable the aspect ratio to be maintained for all displayed imagesPIP Mode Select how many PIP images will be displayed, 2, 3 or 4 (one will be at full screen)PIP 1 Input Select which input channel will be in PIP upper right positionPIP 2 Input Select which input channel will be in PIP center positionPIP 3 Input Select which input channel will be in PIP lower right positionPIP Horizontal Position Position of PIP images from the right side of the screen- range is 0-90% of screen widthPIP Vertical Position Position of uppermost PIP from the top of the screen- range is 0-60% of screen heightPIP Size Size of the PIP image- range is 10-50%Enable Scan Enable input channel scanning when PIP Mode is set to “Single”Scan Time Set the dwell time while scanning- the amount of time (in seconds) each channel will appear inthe single PIP position- range is 0-999Enable Active Scan Enable full screen scanning between the inputs while in PIP modeEnable Border Place a border around each input displayedBorder Color Choose the color of the border around each inputBorder Width Choose the width of the border around each input- from 0-50 pixels
