SPLITMUX Quad Screen Video Splitter31Administration- FirmwareThe Update Firmware page is used to change the firmware of the SPLITMUX. Occasionally new features or changes to existingfeatures will be introduced and new firmware with these changes will be made available on the NTI website(www.networktechinc.com/download/d-hdmi-multiviewer.html). To view the Update Firmware page, select Firmware in theAdministration section of the main menu. Once a user has downloaded the required file for firmware upgrade, this page will beused to upload it to the SPLITMUX.Figure 29- Firmware Update1. Download the most current firmware file from www.networktechinc.com/download/d-hdmi-multiviewer.htmlto a location on your PC.2. Click on the “Browse” button and locate and select the firmware file for the SPLITMUX (splitmux-hd-4rt-vx-x.bin,for example).3. Click on the “Upgrade” button to perform the firmware update. The firmware update process will take approximately 5 minuteswhile the SPLITMUX installs the firmware.Once the update file has been installed, the unit will automatically reboot. Wait for the SPLITMUX to finish rebooting (5minutes). Then click on any menu item and the login screen will appear. Login as normal and resume operation.Note: In the event the SPLITMUX firmware should be corrupted, such that connection through the web interface is nolonger possible, contact NTI for instruction and recovery files to access the SPLITMUX and restore the firmware using aTFTP server and Terminal connection (page 8).
