Element DescriptionSCALE SectionVelocity Adjusts the velocity response of the drum. Available values range from‐100.0 % to 100.0 % (default value). At zero (mid course), the drum is playedat full velocity, no matter how hard you hit the keys (or pads). From that midposition, by turning the knob to the right you increase the positive velocity re‐sponse and make the drum more and more sensitive to the velocities at whichyou hit the keys/pads. From the mid position, turning the knob to the left asthe inverse effect: the harder you hit the key/pad, the softer the resultingdrum sound will be.8.2.8 Kick – MapleThe Maple kick is an acoustic bass drum emulation that provides a realistic and organic sound. Itis suitable for any production where a supporter kick is needed. It fits perfectly with acoustic in‐struments and its room parameters make it fit seamlessly into any mix.The parameters described below are presented as they appear in the Control area (Arrange view).The same parameters are available in the Plug‐in panel within the Plug‐in Strip (Mix view). See↑8.1.5, Pitch Range, Tuning, and MIDI Notes for more information on this.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Kick Plug‐in. If you change this setting, pleaserefer to ↑8.2, The Kicks.Tune Adjusts the pitch of the drum played by the middle C, measured in MIDI notenumbers and cents. Available values range from 42.00 to 54.00. The defaultvalue is 48.00. For more details see ↑8.1.5, Pitch Range, Tuning, and MIDINotes.Decay Adjusts the duration of the sound’s tail, measured as a percentage. Availablevalues range from 0.0 to 100.0 % (default: 50.0 %).Using the DrumsynthsThe KicksMASCHINE ‐ オペレーション マニュアル ‐ 316
