8.7.2 Cymbal – RideThe Ride engine is an acoustic emulation that allows the cymbal to be hit in many different waysthrough the use of the Edge and Bell parameters. The sonic palette ranges from soft Jazz‐likerides to more noisy cymbals.The parameters described below are presented as they appear in the Control area (Arrange view).The same parameters are available in the Plug‐in panel within the Plug‐in Strip (Mix view) — formore information please refer to section ↑12.4, The Plug‐in Strip.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Cymbal plug‐in. Available engines include Crashand Ride.Tune Adjusts the pitch of the drum played by the middle C, measured in MIDI notenumbers and cents. Available values range from 0.00 to 1.00. The default val‐ue is 0.30.Decay Adjusts the duration of the sound’s tail, measured as a percentage. Availablevalues range from 0.0 to 100.0% (default: 70.0%).Impact Adjusts the amount of click or initial attack, measured as a percentage. Availa‐ble values range from 0.0 to 100.0% (default: 70.0%).Width Adjusts the perceived stereo image, measured as a percentage. At zero thesound is mono, at 100.0% the sound is a wide stereo image, replicating the ef‐fect of recording with overhead stereo microphones. Available values rangefrom 0.0 to 100.0% (default: 50.0%).STRIKE SectionUsing the DrumsynthsThe CymbalsMASCHINE ‐ オペレーション マニュアル ‐ 370
