Setup PageParameter DescriptionROUTINGMix Mode Mix mode sets the routing of the signal:▪ In Mix mode, the dry signal is passed unprocessed and thewet signal is added on top according to the Wet Level pa‐rameter.▪ In Replace mode, the dry signal is muted after the first rep‐etition, leaving only the delay tail audible until the effect isreleased.▪ In Wet Only mode, the dry signal is muted entirely, which isuseful for placing the effect on a send.Feed Sets the length of the burst of audio to feed into the delay input when‐ever the effect is initially activated. Shorter burst lengths (e.g.100‐150ms) are useful for picking out notes or drum hits. Longerburst lengths (up to a second) can be used to repeat musical phrases.Set to maximum (>99%), the feed is continuous, deactivating burstmode entirely and simply feeding the delay whenever the effect is on.14.7.4 Reso EchoA complex resonant echo with advanced feedback and saturation that verge on psychedelic ten‐dencies. Echoes range from a tight, punchy resonant hum to ambiguous howling sounds fromanother dimension.Effect ReferencePerform FXMASCHINE ‐ オペレーション マニュアル ‐ 662
