Use the VOLUME, SWING, and TEMPO knobs for the Quick Edit shortcuts.1. Press and hold the pad(s) of the step(s) you want to edit. If you want to adjust the last stepyou have created, skip this step: the last created event is automatically selected. You canalso press the Page buttons left of the displays to quickly select individual steps.2. Turn the VOLUME knob to adjust the events’ velocity.The adjusted value appears on the left display.3. Turn the TEMPO knob to adjust the events’ pitch.The adjusted value appears on the left display.4. Turn the SWING knob to finely adjust the events’ position.The adjusted value appears on the left display.5. When you are done, release the pad(s).The event position will be adjusted independently of the current Step Grid: It is designed as a fineadjustment within the current step.Alternatively you can use the controls in the EDIT section of your controller to edit the selectedevents — see section ↑10.4.4, Editing Selected Events/Notes, ↑10.4.5, Deleting Events/Notes,↑10.4.6, Cut, Copy, and Paste Events/Notes, and ↑10.4.7, Quantizing Events/Notes for more in‐formation on the available commands.10.3.3 Recording Modulation in Step ModeYou can also record modulation in Step mode. This is helpful when you want to set value changesat a specific time in a Pattern.For all details on modulation please refer to section ↑10.5, Recording and Editing Modulation.Working with PatternsRecording Patterns with the Step SequencerMASCHINE ‐ オペレーション マニュアル ‐ 410
