Parameter DescriptionBPM (BPM Mode) Selects how the tempo is defined: If you select AUTO, MASCHINE will calculatethe tempo automatically. If you select MANUAL, you can enter the tempo inBPM manually.ADJUST If BPM is set to AUTO, you can choose between the tempo that MASCHINE de‐tected, or half or double of that tempo. If BPM is set to MANUAL, you can ad‐just the tempo manually.When MODE is set to DETECT, a second section of parameters is available at the bottom of theleft display: the ENGINE section.► When MODE is set to DETECT, press the Right Page button to show the ENGINE section.The ENGINE section.This ENGINE section contains a single parameter: ZERO-X.Parameter DescriptionENGINE Section (Detect mode only)ZERO-X (Zero Crossing,Detect mode only)When MODE is set to DETECT, activate ZERO-X to force the detected Slices tobe created on the closest locations where the audio signal crosses the zero val‐ue. This can be helpful to avoid clicks when playing back Slices in another se‐quence.16.4.3 Live SlicingLive Slicing is a quick and intuitive way to add slices to a sample using the pads on your control‐ler. The first pad is used to trigger the sample and the subsequent pads are used to add slicepoints as required. If necessary, the start and end points of the slices can then be fine‐tuned us‐ing Edit mode.Live Slicing is only available from your MASCHINE controller.Sampling and Sample MappingSlicing a SampleMASCHINE ‐ オペレーション マニュアル ‐ 764
