Modulation PageAs with all other engines and Drumsynths, the Modulation page contains one parameter: Velocity.Element DescriptionSCALE SectionVelocity Adjusts the velocity response of the drum. Available values range from‐100.0 % to 100.0 % (default value). At zero (mid course), the drum is playedat full velocity, no matter how hard you hit the keys (or pads). From that midposition, by turning the knob to the right you increase the positive velocity re‐sponse and make the drum more and more sensitive to the velocities at whichyou hit the keys/pads. From the mid position, turning the knob to the left asthe inverse effect: the harder you hit the key/pad, the softer the resultingdrum sound will be.8.3.3 Snare – PowThe Pow snare is a shot of filtered noise, useful as an electro snare, an effect or a layer in a com‐bined snare sound.The parameters described below are presented as they appear in the Control area (Arrange view).The same parameters are available in the Plug‐in panel within the Plug‐in Strip (Mix view). See↑12.4, The Plug‐in Strip for more information on this.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Snare Plug‐in. If you change this setting, pleaserefer to ↑8.3, The Snares.Tune Adjusts the pitch of the drum played by the middle C, measured as a percent‐age. Available values range from 0.0 % to 100.0 % (default: 50.0 %). For moredetails see ↑8.1.5, Pitch Range, Tuning, and MIDI Notes.Decay Adjusts the duration of the sound’s tail, measured as a percentage (default:50.0 %).Using the DrumsynthsThe SnaresMASCHINE ‐ オペレーション マニュアル ‐ 324
