The EDIT page on the controller, page 2 of 2: adjusting the selection range of the Sample.Parameter DescriptionSTART (Knob 1) Adjusts the start point of the selection range in the Sample.END (Knob 2) Adjusts the end point of the selection range in the Sample.Hold SHIFT when turning the Knobs to adjust the parameters in finer increments.On the right display, the selection range is highlighted.Changing the play range automatically resets the selection range to the new play range.Audio EditingThe EDIT page provides several audio editing functions to process your Sample. Available viaButton 5–8 above the right display, these functions are described in detail in the next section↑16.3.2, Audio Editing Functions.16.3.2 Audio Editing FunctionsIn the Edit page, the Audio Toolbar provides various audio functions. These will be performed onthe selected region of the Sample, as defined by the Start and End parameters of the SELEC‐TION RANGE section (see ↑16.3.1, Using the Edit Page above).► To apply any audio function to the selected region in your Sample, click the desired icon inthe Audio Toolbar.These audio editing functions are destructive, i.e. they modify the audio material in the Sample.However, your original Sample will not be modified: For each audio function that you perform, anew, distinct copy of the Sample will be saved!Sampling and Sample MappingEditing a SampleMASCHINE ‐ オペレーション マニュアル ‐ 751
