Setup MenusBQ 3107 Settings 205Transmit TerminatorFactory default: ETXThis specifies the last character that is sent to indicate the end of ablock transmission. The character can be ETX, EOT or CR.The Display TabPartition 0Factory default: Message RowThe display is divided into two partitions numbered 0 and 1. Parti-tion 0 is a single line that can be used to display status reports andmessages either at the bottom or top of the display, as determined bythe setting of the Message Row option. Partition 1 is a page of 24lines. The setting of this option determines whether Partition 0 isBlank or used as a Message Row.Message RowFactory default: At Row 25The setting of this option determines whether the message row(Partition 0) is at the top or bottom of the display.Blink Displayed AsFactory default: CaretIn VIP mode the start of a flashing field can be indicated by a caretor space character.
