Getting StartedThe TeemTalk Window Display 15Refer to the section “Soft Buttons” on page 244 for information onprogramming the buttons.The Status Bar Along the bottom of the TeemTalk window is a status bar that showsthe status of various operations and enables you to switch betweenmodes. The information displayed in the status bar depends on thecurrent terminal emulation.The following description applies when running any of the DEC VTterminal emulations, though some of the fields and buttons will beapplicable to other emulations as well.1 2 3 4 5 6 7 8 9 10 11Item 1: This displays two LEDs. The first LED indicates whetheror not you are connected to the host. It will show red whennot connected and green when you are connected. The sec-ond LED indicates whether or not data is being sent to orfrom the host. It will show dull green when there is noactivity, red when data is being sent to the host, and brightgreen when data is being received from the host.Item 2: This button enables you to switch between Local andOnline mode. The label indicates the mode you will switchto if the button is clicked.Item 3: This button enables you to Pause or Resume scrolling datain the window. The label indicates the action that will betaken if the button is clicked.Item 4: Indicates the current terminal emulation.Item 5: This displays the active session (always 1), the currentpage number (always 1), and the line,column location ofthe text cursor.Item 6: This indicates whether Overstrike Mode or Insert Mode iscurrently selected. In Overstrike Mode (default), new char-acters will replace already existing characters at the cursorposition. When Insert Mode is selected, new characters
