Host Connection SettingsSSL Connection Settings 77encrypted, along with the certificate itself. Please note this is asecurity risk as anyone who can acquire a copy of your registrywill be able to use your certificate.5 Click OK once you have configured the certificates.6 Either click Next in the Connection Wizard, or Connect in theNew Connection dialog.7 Login as usual when the telnet login prompt appears.Error Messages Could not connect TCP/IP socket.The most likely cause of this error is that the service is not runningon the server, or the port number is incorrect.Could not connect SSL socket. Please check that your clientcertificate is correct.This message is returned if the server refuses the SSL connection.The most likely causes are that the server is expecting a client certif-icate but none has been specified or the client certificate specified isinvalid for some reason. This error may also be seen if the server isrunning an incompatible version of SSL. TeemTalk currently sup-ports SSL2, SSL3 and TLS.The server’s certificate cannot be verified.The server’s identity certificate was not signed by any of the rootcertificates installed in TeemTalk. TeemTalk will not connect to ahost it cannot verify.Common name does not match host name.The common name is part of the server’s certificate. SSL assumesthis will match the host name given in the Host Name box in theConnection Wizard, or Connect To box in the New Connectiondialog. If they do not match TeemTalk will not connect to the host.Notes AboutCertificatesThe SSL Protocol uses three types of certificate:1 Server certificates. These are always sent by the server to theclient to validate the server’s identity. SSL handles theminternally and they are never saved on the client.
