IBM 3270 EmulationNotice Board Facility 3134 Press F13 to copy the selected area. The copied area (i.e. the tar-get) will be highlighted in red.5 Use the cursor keys to move the red target area to the requiredposition on the display. You can also use the Jump key to movethe target area to the host screen or Notice Board.6 Press Enter on the numeric keypad to save the copied area at thecurrent position on the display.Copying ScreenData to a FunctionKeyThe following procedure describes how to copy screen data to afunction key. Note that the Notice Board Setup dialog has severaloptions that determine whether this facility is enabled and whetherall screen data in the selected area is copied, or only data in userentry fields.1 Position the text cursor at the start of the area to be copied.2 Press the Copy key to start the Copy function. Note that thestatus line will display the key functions available.3 Use the cursor keys to move the text cursor to the diagonally-opposite corner of the display area to be copied. The currentlyselected area will be highlighted in green. Note that you cantoggle the position of the text cursor between the twodiagonally-opposite corners of the selected area by pressing theReturn key.4 Press F14 to copy the selected area.5 Press the function key required to store the copied data.6 Press Enter on the numeric keypad to store the copied data inthe chosen function key.
