Nidac 1 Series Instruction Manual
                                    | |
Contents
| 
103.1.2 Status LED in Operating ModeIn operating mode the Status LED indicates the conditions below. - Neither relay is currently active.Green- Lock relay is currently active (door unlocked).Red- Auxiliary relay is currently active (door unlocked).Orange- Both Lock & Auxiliary relays are currently active.Orange- Single key press registered.Red- Double key press registered.What the Status LED indicates in Manager and Installer modes are givenin the relevant sections.3.2 DEFAULT CODESThere are 3 default codes in the VST keypads that can be used forsetting up and testing the installation.The following table gives the default codes based on the code lengthselected in setting 969 of the installer programming section (refer page21). The factory default setting for code length is 0 (variable code lengthfrom 3 to 8 digits).Code LengthSettingDefaultInstallerCodeDefault Manager& Lock Test CodeDefault AuxiliaryLock Test Code0 9999 1111 22223 999 111 2224 9999 1111 22225 99999 11111 222226 999999 111111 2222227 9999999 1111111 22222228 99999999 11111111 22222222The various default codes will automatically be disabled under thefollowing conditions:-The default Installer code is disabled when a new installer code isprogrammed. |
Related manuals for Nidac 1 Series
manualsdatabase
Your AI-powered manual search engine